86e28b4db8
* Adding Files for Zodiark * zodiark.h and keymap.c layout corrections * Apply suggestions from code review Applied all suggestions from zvecr. Co-authored-by: Joel Challis <git@zvecr.com> * Applied all suggestions from fauxpark Co-authored-by: Ryan <fauxpark@gmail.com> * Defined matrix driver * Update keymap with GPL2 * Added GPL2+ to All keymap.c, cleaned up config.h, and removed the rgbmatrixwip keymap * Apply suggestions from code review Removed the two lines from the config.h and changed to the smaller resolution picture on the Readme. Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Added VIA keymap * Corrected VIA Keymap oled.c Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
27 lines
1.1 KiB
Makefile
27 lines
1.1 KiB
Makefile
# MCU name
|
|
MCU = atmega32u4
|
|
|
|
# Bootloader selection
|
|
BOOTLOADER = caterina
|
|
|
|
# Build Options
|
|
# change yes to no to disable
|
|
#
|
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
CONSOLE_ENABLE = no # Console for debug
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
NKRO_ENABLE = no # USB Nkey Rollover
|
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
|
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
|
AUDIO_ENABLE = no # Audio output
|
|
OLED_DRIVER_ENABLE = yes # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C
|
|
ENCODER_ENABLE = yes
|
|
SPLIT_KEYBOARD = yes
|
|
LTO_ENABLE = yes
|
|
RGB_MATRIX_DRIVER = WS2812
|