chris/qmk_firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 2
qmk_firmware/keyboards/momoka_ergo
History
Exact
Jack Sangdahl 12dc6d1ac8
Fix serial speed DD configuration & migrate keyboards (#25546) 
* Fix serial speed DD configuration

- Fixes incorrect SOFT_SERIAL_SPEED mapping
- Renames key split.soft_serial_speed -> split.serial.speed
- Migrates keyoards that configure this, and remove configuration from keyboards that do not differ from the default behaviour
- Add deprecation notice and migration support
2025-08-09 23:14:40 +01:00
..
keymaps/default
config.h Fix serial speed DD configuration & migrate keyboards (#25546) 2025-08-09 23:14:40 +01:00
keyboard.json Fix serial speed DD configuration & migrate keyboards (#25546) 2025-08-09 23:14:40 +01:00
readme.md

readme.md

momoka_ergo

momoka_ergo

The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable.

  • Keyboard Maintainer: StefanGrindelwald
  • Hardware Supported: momoka.co/ergo
  • Hardware Availability: momoka.co/ergo

Bootloader:

With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB.

Make example for this keyboard (after setting up your build environment):

make momoka_ergo:default

Flashing example for this keyboard(Note that you need flash the both side keyboard respectively):

For the left side:

make momoka_ergo:default:dfu-split-left

For the right side:

make momoka_ergo:default:dfu-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.